Ceramic Tiles For stove: A return to ancient traditions with the use of innovative technologies in the production of tiles for stoves and fireplaces – this is a modern stove heating that not only protects from the cold, but also represents an aesthetic component of the interior. Tiling a stove is quite a laborious process, but if the task is to make a high-quality finish of the stove with tiles, it will be worth it. Ceramic tiles for stoves and fireplaces, as a rule, are produced in separate collections, they look beautiful and clean. It not only brings aesthetic beauty to the interior of the room, but also acts as an additional obstacle to the possible penetration of smoke into the room due to small defects in the masonry. Stove and fireplace tiles are an independent art and craft form. This process needs to be approached in a more thoughtful and responsible way.
As you know from school, when heated, all materials expand, so they increase in linear dimensions. They return to their original position after cooling down. Even with all the advantages of ceramic tiles, not all are equally suitable for laying on the surface of hot objects. Therefore, before buying a tile for lining furnaces, consult a specialist and do not accumulate the question of how to liner the furnace with tiles, hire professionals for such work. In the national market, there is a large assortment of stove tiles, specially created for these purposes. Tiles for the stove are a material that is obtained by baking clay with the addition of various mixtures. As a general rule, the tiles for the stove are flat tiles covered with glaze on the front (majolica tiles) or unglazed (terracotta).
Also Read: High-Quality Luxury Ceramic Tiles Details
Refractory Glazed, Corner and Cornice Tiles are mounted on the entire surface of the kiln on a galvanized steel metal profile. All voids are filled with a mixture of clay and sand with the addition of crushed brick. Standard pigmented grout is recommended for grout. Thus, the stove seems to be covered with a tiled chainmail, acquiring a strong, elastic and incredibly decorative surface. These oven lining tiles are very easy and hygienic to maintain. If the fixing of the tiles to the surface is mechanical, with the help of annealed wire, staples and clamps, then the coating of terracotta tiles is done manually.
By laying fireplace tiles without overheating during operation, it is allowed to use special heat-resistant putty. Before facing the furnace with ceramic tiles, the surface of the object is preliminarily leveled, all gaps are putty, grouting with sandpaper until completely leveled. It is important to remember that the adhesive layer should not exceed 2-3 mm. The thickness of the tile joints varies from 3 to 5 mm. After the putty has dried, the joints must be filled with inorganic grout. Unglazed ceramic tiles for lining the stove and fireplace are rightfully considered the most organic material, as they have a similar nature to the masonry objects themselves, made of bricks. Its textured surface contributes to greater heat transfer. Today, in terms of durability, clinker stovetop tiles are unmatched and their beautiful warm tones bring additional coziness and comfort to any interior.
