Homeowners should spend 1% to 4% of their home value on maintenance such as bathroom repairs.
Bathrooms can cause major problems whether it’s fixing a leaky faucet or a running toilet. Perhaps you’re planning to improve your home improvement skills but you’re not sure which areas to focus on.
Sounds familiar? Luckily, you’ve come to the right place. Here are the top five bathroom repairs to consider.
1. Slow or Clogged Drains
Drain clogs are one of the most common bathroom repairs. This is often due to a buildup of hair, grime, and soap that has blocked the pipes. As a result, the water slowly drains or becomes clogged.
Make sure the household isn’t flushing wipes, tissue paper, or sanitary pads as this will make it worse. If you want to learn how to fix slow drains, read more here.
2. Weak Water Pressure
There’s nothing more frustrating than weak water pressure when you’re desperate for a shower. Many homeowners experience this if there’s a limescale buildup in their system. Luckily, you can fix this by descaling the pipes or replacing the showerhead in your bathroom renovation.
3. Leaky Faucets
The average American household’s leaks waste nearly 10,000 gallons of water every year.
Aside from water wastage, a leaky faucet can cause structural damage if it pools onto the floor and is left unattended. Dripping showerheads are another issue because the excess moisture causes mold so you must get a replacement.
If you have a leaky faucet problem, you need to ensure that your drainage is working just fine. This means investing and installing easy drain products that can help you overcome leakage problems. If you do not invest in proper drainage, you might be looking at problems of standing water, rust and corrosion.
4. Running Toilet
One of the most frustrating bathroom appliances is the toilet. Homeowners may experience a running toilet which causes their water bill to skyrocket. If you constantly hear a gurgle, then inspect your tank and check whether the flapper chain is stuck.
Use a stick to push down the flapper and if the running stops, you must replace the component. But make sure you turn off the water supply valve underneath the toilet before installing the new flapper.
5. Overflowing Sink
Got an overflowing sink? This is because the sink overflow, the small hole underneath the faucet, is clogged. It’s a crucial component because it diverts water so your bathroom doesn’t flood if you forget to turn off the faucet.
Make sure you regularly clean the sink overflow so it doesn’t get clogged. To do this, push a pipe cleaner in and out of the hole to remove as much grime as possible. Next, grab a silicone funnel, and insert it in the sink overflow before pouring boiling water through it.
The liquid will loosen and flush any buildup so do this until the pipe cleaner comes out pristine.
These Are the Most Common Bathroom Repairs
Hopefully, after reading this article, you now know the main bathroom repairs.
Take immediate action if the drain is clogged, your sink overflows, and your toilet is constantly running. Don’t worry if you don’t have the know-how, simply contact a plumber as they have the experience and equipment to help you. Good luck!
Did you find this article helpful? Great! Then check out our posts on everything from Fashion to Real Estate.
Read Also : Blend Nature into Your Interior Décor
